| 
 | 
| Q:解决 IP 地址冲突de完美方法 A:使用的方法是采用DHCP方式为用户分配IP,然后限定这些用户只能使用动态IP的方式,如果改成静态IP的方式则不能连接上网络;也就是使用了DHCP SNOOPING功能。
 例子:
 version 12.1
 no service pad
 service timestamps debug uptime
 service timestamps log uptime
 no service password-encryption
 service compress-config
 !
 hostname C4-2_4506
 !
 enable password xxxxxxx!
 clock timezone GMT 8
 ip subnet-zero
 
 no ip domain-lookup
 !
 ip dhcp snooping vlan 180-181 // 对哪些VLAN 进行限制
 ip dhcp snooping
 ip arp inspection vlan 180-181
 ip arp inspection validate src-mac dst-mac ip
 
 errdisable recovery cause udld
 errdisable recovery cause bpduguard
 errdisable recovery cause security-violation
 errdisable recovery cause channel-misconfig
 errdisable recovery cause pagp-flap
 errdisable recovery cause dtp-flap
 errdisable recovery cause link-flap
 errdisable recovery cause l2ptguard
 errdisable recovery cause psecure-violation
 errdisable recovery cause gbic-invalid
 errdisable recovery cause dhcp-rate-limit
 errdisable recovery cause unicast-flood
 errdisable recovery cause vmps
 errdisable recovery cause arp-inspection
 errdisable recovery interval 30
 spanning-tree extend system-id
 !
 !
 
 interface GigabitEthernet2/1 // 对该端口接入的用户进行限制,可以下联交换机
 ip arp inspection limit rate 100
 arp timeout 2
 ip dhcp snooping limit rate 100
 !
 
 interface GigabitEthernet2/2
 ip arp inspection limit rate 100
 arp timeout 2
 ip dhcp snooping limit rate 100
 !
 interface GigabitEthernet2/3
 ip arp inspection limit rate 100
 arp timeout 2
 ip dhcp snooping limit rate 100
 !
 interface GigabitEthernet2/4
 ip arp inspection limit rate 100
 arp timeout 2
 ip dhcp snooping limit rate 100
 
 注:DHCP Snooping
 
 DAI,Dynamic ARP Inspection
 
 IP Source Guard
 
 DHCP Interface Tracker (Option 82)
 
 设备局限很大,3550---4000系列之间能用,用来防止基于内部的2层攻击,同一VLAN防止私自建立DHCP SERVER
 | 
 |